STEP 8

The top cover has been removed.

STEP 9

In the next steps I'll be taking apart the display panel.

You'll find six rubber screw seals on the screen bezel.

STEP 10

Remove all six seals with a sharp object.
Glue them somewhere on the bezel, so they don't get lost.
Remove all six screws found under rubber seals.

STEP 11

Start separating the screen bezel from the display cover.
You can use a piece of soft plastic. In my guide I'm using a guitar pick.

STEP 12

Continue removing the screen bezel on the top.

STEP 13

Finally, proceed to the lower part of the display.

STEP 14

The screen bezel has been removed.

STEP 15

The screen inverter board is located on the bottom.
Remove one screw securing the inverter and unplug cables from both sides.
Remove the inverter board.