STEP 10

Remove two screws securing the LCD screen on the top.

STEP 11

The wireless antenna and webcam cables on the right side of the display panel are secured by three foil strips.
Unglue foil strips as it shown on the picture.

STEP 12

Do the same with four foil strips on the left side of the display panel.

STEP 13

Disconnect the black cable from the web camera module.
You will not be able to separate the screen from the cover without disconnecting this cable.

STEP 14

Separate the display cover from the LCD screen assembly.

STEP 15

Now you can access the video cable connection on the back of the screen.

STEP 16

Disconnect video cable from the connector on the LCD screen.

STEP 17

Remove three screws from both sides of the LCD screen.
These screws secure the LCD screen to the mounting brackets.

STEP 18

Remove the LCD screen and replace it with a new one.

STEP 19

You can search for a new screen using the LCD screen model number (LTN160AT01 in my case) or Toshiba part number (K000065920 in my case).

Search for a new screen here.