www.irisvista.com

Support my work!
It takes hours to create one disassembly guide and only a minute to donate.
 

STEP 10

On this picture the connector is shown in the unlocked position.
Now you can pull the cable from the connector.

 
 

STEP 11

Remove the keyboard.

You can replace the keyboard with a new keyboard if needed.

   

STEP 12

In the following six steps I explain how to remove the top cover assembly.

Remove all screws from the bottom of the laptop.

   

STEP 13

Remove two screws securing the top cover assembly.

Disconnect (from top to bottom): media board cable, speaker cable, touchpad cable.

   

STEP 14

You simply pull the touch pad cable and media board cable from the connector. There is no locking tab.

   

STEP 15

Carefully unplug the speaker cable.
Do not pull by the wires. Unplug the connector using your finger nails.

   

STEP 16

Start removing the top cover assembly.

   

STEP 17

The top cover assembly removed.

   

STEP 18

This picture shows the laptop without top cover assembly.

In the next two steps we'll remove the cooling fan which is located in the top left corner of the laptop.

   
 

 

 

Terms and Conditions | Privacy Policy