STEP 7

Carefully remove the inverter board from the display assembly.
Disconnect the LCD backlight cable from the right side of the inverter.
I'm not replacing the inverter board and leave the cable on the right side connected.

If you want to replace the inverter board, you can find a new inverter for Satellite P100/P105 laptops here.

STEP 8

Remove two screws from left and right sides of the LCD screen.
These screws securing the LCD screen to the mounting brackets.

STEP 9

Carefully separate the LCD screen from the cover and place it face down on the palm rest.

STEP 10

Now you can access the video cable connection on the back and disconnect the cable.

STEP 11

Unplug the video cable connector from the LCD screen.

STEP 12

Remove sticky tape securing the video cable to the LCD screen.

STEP 13

Carefully remove the LCD screen from the laptop and replace it with a new one if needed.

Looking for a new screen for Satellite P100/P105 laptop? Search here.