STEP 8

Disconnect the LCD backlight lamp cable from the right side of the inverter board. I'm not replacing the inverter in my case.

If you would like to replace the inverter board, disconnect the second cable on the left side and remove one screw securing the inverter to the cover. Replace the inverter board with a new one.

STEP 9

Remove two screws securing the LCD screen assembly.

STEP 10

Separate the LCD screen from the display cover and access the video cable connector on the back.

STEP 11

Carefully disconnect the video cable connector from the connector on the LCD screen.

STEP 12

Remove the LCD screen assembly from the laptop.

STEP 13

If you are replacing the LCD screen (as I do), you'll have to transfer LCD mounting brackets to a new screen.

Remove four screws securing the bracket and remove the bracket. Do the same with the second bracket.

In the next guide I explain how to disassemble a Tecra S3 notebook and remove all internal parts including the motherboard.