STEP 9

Remove all marked with red circles screws on the bottom of the laptop.

STEP 10

Turn the laptop right side up.
Using a sharp object, lift up the keyboard securing strip.

STEP 11

Remove the keyboard securing strip.

STEP 12

Remove two screws on the top of the keyboard.
Lift up the keyboard and place it up side down on the palmrest.

STEP 13

Disconnec the keyboard cable on the system board.

STEP 14

Remove the memory module.
Remove the tape covering the wireless card antenna cables, disconnect antenna cables and remove the card.

STEP 15

Disconnect the tablet on-off mode switch cable on the system board.
Remove two screws securing the top cover assembly to the laptop base.

STEP 16

Rotate the screen, so you can access one more screw.
Remove the screw seal and remove the screw.

STEP 17

Now you can lift up the top cover / display assembly starting from the back of the laptop.