|
|
|
STEP 9
Disconnect the keyboard flat cable on the system board and remove the keyboard.
|
Laptop Parts Expert
Parts for Toshiba, IBM, HP, Compaq, Dell and other brands.
Free ground shipping on all orders over $79
|
|
| |
|
 |
STEP 10
Close the lid and remove two screws on the back of the laptop. |
| |
|
 |
STEP 11
Remove two screws securing the display hinges.
Disconnect the video cable on the laptop VGA board and remove the cable from its route.
Remove the tape securing the Wi-Fi antenna cables to the top cover. Pull the antenna cables through the opening in the top cover.
Remove Wi-Fi antenna cables from its route on the top cover. |
| |
|
 |
STEP 12
Lift up the laptop LCD assembly from the base and remove it.
|
| |
|
 |
STEP 13
Remove six screws securing the top cover assembly to the laptop base.
Disconnect the power switch board cable, the speaker cable, the touchpad cable on the system board. |
| |
|
 |
STEP 14
To separate the top cover assembly and the laptop base you can use a guitar pick.
Put the guitar pick between the top cover and the laptop base and move it along the side to release the latches. |
| |
|
 |
STEP 15
Remove the top cover assembly. |
| |
|
 |
STEP 16
Carefully lift up the VGA (video) board to disconnect it from the system board. |
| |
|
 |
STEP 17
Remove the laptop video board. |
| |
|
 |
|
