STEP 7

Remove one screw securing the DVD drive and slide the drive from the laptop.
After the DVD drive is removed you'll get an access to the hard drive.

STEP 8

Remove four screws securing the hard drive.
In order to disconnect the hard drive from the motherboard, slide it to the direction shown by the red arrow.
Lift up and remove the hard drive.

STEP 9

Remove all marked screws from the bottom of the laptop.

STEP 10

There are two more screws located on the back side of the laptop.
These screws secure the display panel hinges.
In order to remove these screws you'll have to remove sticky screws seals.

STEP 11

Now it's time to remove the keyboard.
Insert a small flathead screwdriver between the keyboard bezel and the keyboard and lift up the bezel.

STEP 12

Carefully remove the keyboard bezel with your fingers.

STEP 13

Remove two screws securing the keyboard.