|
|
 |
STEP 6
Remove four screws securing the screen to the top cover.
Two screws from the top corners and four screws from the bottom covers. |
Laptop Parts Expert
Parts for Toshiba, IBM, HP, Compaq, Dell and other brands.
Free ground shipping on all orders over $79
|
|
| |
|
 |
STEP 7
Separate the LCD screen from the cover.
Remove four screws from each side of the screen. These screws securing the screen to the laptop hinges. |
| |
|
 |
STEP 8
Carefully place the LCD screen on the palm rest, you can put soft cloth between the screen and the palm rest.
Remove sticky tape securing the video cable to the LCD screen and covering the video cable connector (marked with red arrow). The video cable can be glued to the screen.
Unplug the video cable from the connector on the LCD screen. |
| |
|
 |
STEP 9
Unplug cables from both ends of the screen inverter. |
| |
|
 |
STEP 10
Carefully unglue the screen inverter from the top cover and remove/replace the inverter. |
| |
|
 |
STEP 11
The LCD screen and inverter board have been removed.
Are you looking for a new LCD screen or other parts? You can buy it here. |
| |
|
 |
|
