STEP 8

After all latches are released you can remove the keyboard bezel.

STEP 9

After the keyboard bezel is removed, you get access to four keyboard screws.
Remove all four screws.

STEP 10

Carefully lift up the keyboard so you can access the keyboard cable connected to the motherboard.
Unlock this connector and remove the keyboard cable.

STEP 11

In order to split the notebook case, you'll have to remove all marked screws located under the keyboard.

STEP 12

Unplug both wireless card antenna cables.
Remove two screw securing the wireless card and remove the card.

STEP 13

Disconnect the switch board cable from the motherboard.
Before you pull the cable, unlock the connector.

STEP 14

Start separating the speaker cover from the notebook.
Again, you can use the same guitar pick.

STEP 15

After all latches are released, lift up the back side of the speaker cover.